Mine is a 32GB Black iPhone. The specifications can be found on Apple website so I am not going to repeat them again here. I used a sleek Nokia 6300 before this so it took me some time to adapt to the bigger/wider iPhone. This is not really a problem to get used to, actually. So, let’s put aside the physical differences.

I had been looking into various smart phones by Nokia and Sony Ericsson before I settled for Nokia 6300 almost two years ago. Well, nothing is comparable to iPhone as I find today.

On the 4th day, I had already got a chance to take my brand new iPhone into action. I completed a task outside and needed to go back to my home/office. I usually made payment to my suppliers at the bank. Then I would go back home/office to scan and email my suppliers before they could send me the goods. This usually would happen a few hours later or in the evening because I have the habit of being cost-effective when running errands outside. With iPhone, I snapped a photo of the bank transaction slip with its built-in 3 megapixels camera and emailed the photo to my supplier immediately. By the time I stepped out the bank, my supplier had called me and confirmed receipt of the fund. Everything was done on the iPhone at the bank.

While the competition in smartphone market is mounting with Google’s Nexus One and Android enabled phones with attempt to take down iPhone, nothing has come closer to the 3 billion downloads of iPhone apps at Apple’s App Store.

I am using quite a number of applications for productivity and I find them all useful. I am able to check my schedule and make appointment, follow my to-do list, review some documents (PDF, graphics etc,) which my co-workers and I shared. More, I can email, facebook and tweet anytime, anywhere with the iPhone (the list goes on.) These tasks are a little over killed on a MacBook I can say.

When my dad was in the hospital a few months ago (I still had not had my iPhone then), I had been in and out of the hospital with my backpack. It was quite annoying trying to find a good spot where I could sit down, open up my 13″ MacBook and connect it with a 3G broadband. Sometimes, the seat had been taken by patients’ relatives. Most of the time, my MacBook and I became the attraction of bored people sitting around me. Some nosy people would peep at my screen. Checking and replying business emails had became a difficult task as my privacy was invaded. It was like houseflies buzzing around while you were eating your chicken pie. Were you able to enjoy anyway?

With iPhone, this scenario has changed a little bit. I am still able to communicate and do some light tasks without the need of my MacBook and houseflies peeping. I can add, modify or delete appointments and contacts on iPhone and sync with my Macs via MobileMe. I am also able to update my to-do list and sync with my Macs via WiFi later when I am home.

As a software developer, I spend most of my time at the keyboard spewing codes other than blogging, emailing, facebooking and tweeting. I would rather save this coding task on my Macs if there is any code editing app available for iPhone. When I am not at my desk, I would want to follow up with tasks like the reviewing of drawings/images (icons, logo etc), design and technical documents on iPhone.

The iPhone is handy during short discussion sessions (less than 15 minutes) with co-workers and clients. A relatively large MacBook would look clumsy in this situation.

I can also use iPhone as a remote controller to navigate Keynote presentation slides using Apple’s Remote. This app makes me look more professional (and well, cooler) when presenting because I need not walk to my MacBook to press a key every each time I want to change the slide. I can do it on my iPhone.

Well, the list goes on and on so long you have not run out of imagination of  how to utilize your iPhone. I would never go back to Nokia or Sony or anything else except iPhone.

I have several reasons to buy an iPod Touch but I am not going to talk about them here. One most ostensible use of it is that I am no longer required to lug my MacBook (code-named Uranus) everywhere I go. Since it replaces the function of Uranus when it is not with me, I name my iPod Touch, Miranda, one of the five moons of Uranus. Miranda is the inner most and smallest moon of Uranus and is also referred to Uranus V.

Will Sun set and never rise again? Here is my encounter of the hot Sunny affair.

In October 2006, I installed Solaris 10 on an Intel box code-named, Pyxis1 (I love to name my computers after the name of a planet, a star or a constellation). The installation was successful but I could not get it to configured to work correctly. Some of the configuration would disappear every time I restarted the server. I could not find the reasons and I was on tight schedule to get the server up and running. I replaced Solaris 10 with Debian and eventually with Ubuntu. Read the story here.

Solaris 10, in my opinion, is by far a better and more robust operating system than Linux. The fallback was the lack of installation information on older machines. That’s the bottom line of the configuration problem I had three years ago.

Last May, I began the virtualization of my MacBook and I had Ubuntu installed and ran parallel with Mac OS X. I tried to install Solaris 10 on VMware Fusion. Installation was successful but I never got it to boot after the installation. Again, I gave up and went on with Ubuntu.

On Sunday, I upgraded VMware Fusion 1.1.3 to 2.0.2 and read about successful installation of OpenSolaris on Mac. I decided to give it another try.

OpenSolaris is a community-driven open source version of Solaris. Solaris is a proprietary UNIX operating system by Sun Microsystems. Sun plays an active role in open source software such as OpenOffice, MySQL and OpenSolaris.

VMware Fusion 2.x has many major improvements. One obvious change is the Virtual Machine Library window. It shows you the snapshots of your virtual machines.

The Virtual Machine Library window showing the snapshots of OpenSolaris and Windows XP

Ok, ok. I have a Windows XP installed. For those who know I have ditched all Windows since 1998, I have some inevitable reasons. First, I need it to support my clients on some hardware and software configurations. Second, I needed it to support my Garmin GPS device. And thirdly, I need it for some non-appealing reasons. I have it installed to avoid having the need to hunt for a Windows desktop for some petty simple jobs. I used the Windows virtual machine under 10 times since last May. Simple put it, I just need it to get some simple jobs done, otherwise it is just a piece of shit occupying 5GB of disk space on my MacBook.

Installation of OpenSolaris was quite pleasant and simple (although it took about half hour). During the installation, I was surprised to learn that OpenSolaris has something called Time Slider which is an automated backup software similar to Apple’s Time Machine.

My hardware configuration:

1. MacBook White, 2.16GHz Intel Core 2 Duo
2. 2GB 667MHz DDR2 SDRAM
3. 160GB hard disk
4. Mac OS X 10.5.6

My virtual machine configuration:

1. VMware Fusion 2.0.2
2. 2 virtual CPU, 720MB RAM
3. 15GB hard disk space

Installation screen showing Time Slider

I will never need Time Slider on my Mac Book but I may need it after I switch from Ubuntu to OpenSolaris on Pyxis1. Until then, I am unable to tell if Time Slider is as good as Time Machine.

There are a few patches and manual installation after the first boot to solve some problems:

1. The sound is not working.
2. No networking (you may not experience this).
3. The Apple’s menu bar is not appearing when virtual machine is running in full screen mode.
4. Need some packages from OpenSolaris repository in order to get the Ada compiler working (for Ada programmers only).

OpenSolaris running at full screen on MacBook White.

First thing after restarting from installation is to install VMware Tools. At window mode, click on the Virtual Machine menu bar and select Install VMware Tools. A CD icon will appear on the OpenSolaris desktop. Open it and copy the zipped file to the desktop then extract and follow the steps below:

# cd Desktop/vmware-tools-distrib
# ./vmware-install.pl

OpenSolaris virtual machine running in window mode

After installing VMware Tools, you will be able to access to Mac OS X menu bar when virtual machine is running full screen mode. Move the mouse pointer to top of the screen and the menu bar will drop down.

If the two networking icons on the top right do not show green badge as in the screenshot below, then make sure your Virtual Machine Network Settings is connected and set to NAT (share the Mac’s network connection). The network should also work in Bridged mode. Also make sure the OpenSolaris network interface is connected to e1000g0 and is active.

Two networking status icons with green badge

Otherwise, click on System > Administration > Network to set it to auto configure. Your network should be up and running. 

Next is to activate the sound. Download OSS (Open Sound System) driver at http://4front-tech.com/download.cgi and install it as follow:

# pkgadd -d oss-solaris-v4.0-123-i386.pkg
# osstest

After the installation, run osstest to test the sound system. You will hear a tune playing on your speakers. You may need to reboot your system to allow the driver to properly load.

There are a few more packages to be downloaded and installed from OpenSolaris.org repository. To install gcc4ada from BlastWave, you will need SUNWgnu-libiconv and SUNWarc. Start Package Manager to download and install them from OpenSolaris repository. If you need source code management, you will need SUNWsvn as well.

The OpenSolaris repository does not have Ada compiler (gccada) and only supports gcc 3.4.3. You will have to install Ada compiler from another repository at Blastwave.

To download and install software packages from Blastwave, you need pkgutil. Download and install pkgutil and other necessary packages by following the instruction at Blastwave site. You can obtain a list of software packages that you need from Blastwave. After installing pkgutil, you may want to include /opt/csw/bin to your path.

If you need an Ada 2005 compiler, then download and install gcc4ada:

# pkgutil --install gcc4ada

Include /opt/csw/gcc/bin to your path and the Ada compiler is ready. I checked out a project from my svn repository and compiled. Viola! I am happy with the performance which I find is better than Ubuntu and any other Linux distros. One drawback of OpenSolaris or Solaris is the limited software packages. There are more than a thousand ready-built software packages to download in every Linux distros. That means you will have to build some of the software you need on Solaris (and OpenSolaris).

I removed and re-installed OpenSolaris yesterday after I found some broken links due to not following the instructions correctly. Always read installation instructions from various sources carefully before installing. I find the trouble is worthy otherwise I will not have a clear summarized steps to write about here.

With the recent IBM’s announcement to acquire Sun Microsystems, I hope Sun will not be cannibalized after the acquisition. And I hope that Sun is not setting but if it must, it will rise again. OpenSolaris and UltraSPARC processors are one of the leading technologies available.

I hope to find time on a weekend to install OpenSolaris on the Sun Blade 100. It is still running Solaris 9 since 2003.

Why?

There are numeral reasons for that:

1. All Macs work straight out of their boxes. No configuration, no installation of sort. Gadgets like MiniDV cameras just work by connecting to any Mac with a FireWire cable, basically any well known brands of digital cameras will work straight out of their boxes with any Mac without installing any drivers (iPhoto), calendar and contact will sync with any supported cell phones and many more.
2. Friendly and stunning user interface make it easy to work on Mac.
3. Colors and graphics are superb on Mac. Nothing comes close to it.
4. The damn Mac just works without crashing the entire system (although sometimes they do but negligible) comparing to other systems running Windows and Linux.
5. Applications running on Mac are very easy to use and always come with great features and usability.
6. and the list goes on and on….

In plain simple words, Macs get your jobs done.

The other two compelling reasons are Apple’s brilliant packaging and product finishing which give value for money kind of feeling. The packaging boxes are usually compact and slim, using less material and they are environmental friendly. As long as the product design and finishing are concerned, no other PC manufacturer can rival Apple’s ingenious design.

Apple is notoriously well known for its secrecy. Apple was also the largest participant in Macworld Expo and Conference as well as several other similar trade show. Last December, Apple abruptly announced that it would stop participating in future events. Macworld 2009 which was held in January this year was Apple’s last participation.

By tradition, Apple would announce upcoming product release. Users would usually stop buying Apple’s until they got an idea of what was coming along and would wait until a new product was available. This hurt Apple’s business prior to every expos and conferences. The change of strategy will leave speculation high up in the stake.

The new aluminum MacBook lacks of FireWire port is under fire by many MacBook and especially MiniDV tape camcorder users. Without the FireWire port, it becomes not possible to transfer video from MiniDV tape camcorders.

The lack of FireWire port also disable the FireWire disk mode which is quite useful to salvage the contents of hard disk if there is any problem to boot. By connecting MacBook via FireWire, user is able to transfer data from one Mac to another.

New DV camcorders support USB for transferring video images, responded Steve Jobs to unhappy new aluminum MacBook users. Indeed, all new DV camcorders (with built-in hard disk or flash storage media) support only USB for transferring video. But there are still many old MiniDV tape camcorder users like me wanting to be able to transfer from an old MiniDV tape camcorder. My Panasonic MiniDV tape camcorder which only supports FireWire is still in excellent working condition and I have no intention to change a new camcorder. I have no intention to “upgrade” my white MacBook to the all new aluminum MacBook either.

Apple has been deleting all posts (about lack of FireWire in new aluminum MacBook) in its forum. You can read about users complaining in other forums here and here.

The all new aluminum MacBook is something nice to have but not must have. To a seasoned Mac user like me who is cautious in choosing my Mac, it does not have any better contribution to my computing other than its stylish outlook, the new multi-touch-buttonless-smooth-glass trackpad.

Although it sports 2GB of DDR3 SDRAM, the price which differenced by $300 (RM1,100 in Malaysia) between 2.0GHz aluminum and white MacBook does not worth the performance per dollar. There is also a difference of 40GB between both models and other technical specifications are identical. With the extra $300 (or RM1,100), you can upgrade the 120GB hard disk drive to 250GB or 320GB plus AppleCare Protection Plan. If you top up about $100 (or RM390), you can upgrade your 2GB DDR2 SDRAM to 4GB in the white MacBook and it still will run as fast as the aluminum MacBook with original spec.

Let’s come back to the lack of FireWire port in new aluminum MacBook. All white and previous MacBook have built-in FireWire 400 port while the MacBook Pro series supports FireWire 800. FireWire 400 can transfer data between devices at 100, 200 and 400 Mbit/s half-duplex data rates. The actual data transfer rate is slightly lower, for example, at 98.304, 196.608, and 393.216 Mbit/s respectively.

Data transfer over FireWire 400 interfaces generally outperforms similar transfer over USB2.0 interfaces though it nominally runs at signaling rate at 480Mbit/s, slightly higher than FireWire 400.

The FireWire enables remote control (play, rewind, etc.) of connected camcorder/device. With the exclusion of FireWire support on latest digital camcorders, remote control of the devices becomes not possible.

Again, why does Apple discontinue FireWire support on the new aluminum MacBook? Is it an oversight or plainly to cut costs?

Does it indicate Apple’s intention to move MacBook users for video capability to higher and more expensive hardware such as MacBook Pro? The speculation is not without fundamental analysis. The argument for getting a USB-FireWire converter or even upgrade to newer digital camcorder does not justify dollars spent. Why should one spend extra money for extra gadget? Why should a person throw away a still working old camcorder just for a USB connection?

With the economic downturn, Apple is no exception to be affected by this world financial crisis. In the last week or two, Apple slashed prices and spiked up the specs to lure buyers. The white MacBook is there to stay to help ramping up Apple’s sales. How long will it be before Apple sends the white MacBook to EOL (End Of Life)? Definitely not within these few weeks. Three months later?

Another trend you can see or forecast is the new Mac OS X Snow Leopard will be released sometime around June or September, as we can already see that Apple has rolled out all new models from its arsenal. By then, Apple would have sold many Mac and those new Mac owners would be rushing to upgrade to the new Snow Leopard optimized for dual/quad core processors, unleashing more powerful multi-core processing power horse. Apple will cash in again for the upgrade. If you are not in urgent need to buy a Mac or upgrade or replace a Mac, do wait till Snow Leopard is released. It will be worth the wait.

Talking about Mac OS X upgrade, my iBook came with Jaguar. When Panther was released about a year later, everybody was rushing for the upgrade. I waited until Tiger was released and unfortunately, my iBook died not long after I gave it a Tiger. When I purchased my other Macs, they came with Tiger. I acquired a Leopard upgrade at someone’s disposal. I wanted the Time Machine feature to safe guard my data after my iBook was dead. I had sleepless nights worrying about my data and thank God that my data was safe. 

If you are in need of a lower cost MacBook with FireWire capability, do grab the white MacBook now because we have no idea when Apple will pull the plug.

Apple’s marketing and sales strategy exploit human psychology very well. Trend and new state-of-the-art hardware will make heads turn. Apple understands that perfectly well and it uses this intuitive human behavior to cash in. New and unseasoned Apple users, oftentimes teenagers, who are not giving a thought and are not following up Apple’s strategic plan will likely fall prey to coughing out hard-earned dollars for the new cool leading edge hardware to impress people around them.

Is Apple playing dirty tricks to feed its share holders? You judge for yourselves. Apple is no doubt the world most profiting computer company with very happy investors. So, if you ever need to buy a Mac now, do consider the facts and justify your needs and dollars wisely.

1. I have too much money to spend for a spare hard drive to clone my Mac hard drive.
2. I want to have a bootable external hard drive, installing on an external USB hard drive is not possible.
3. I want to upgrade my Mac’s hard drive, and I don’t want to do the installations and setup all over again

Obviously number 3 is my answer. I acquired a bigger capacity hard drive to upgrade my current 120GB hard drive in my MacBook. After some Googling around, I found an answer.

There is an Apple utility program called Apple restore or asr located in /usr/sbin. Connect your external USB hard drive and format it using Disk Utility. Open the Terminal in Applications -> Utilities. Type the following command line into the Terminal to copy your hard drive over your external drive.

% sudo asr -source /Volumes/OSX BOOT VOLUME NAME/ -target /Volumes/TARGET VOLUME NAME/

Replace “OSX BOOT VOLUME NAME” and “TARGET VOLUME NAME” with actual volume names. asr will take quite some time to copy the contents of hard drive to external hard drive. Get a cuppa, pop in your iPod earphone and relax.

When asr completes the execution, it will print a message:

asr: did not copy blessed information to target, which may have missing or out-of-date blessed folder information.

Then, bless your target drive with this:

% sudo bless -folder /Volumes/TARGET VOLUME NAME/System/Library/CoreServices

Now, the hard drive is bootable. Restart your Mac and hold down “option” key. A screen will appear allowing to choose which volume to boot from.

Just came back from a business meeting which I delivered an Apple MacBook to a customer. She is a mutual fund manager and is totally new to Apple. The moment she took out her new MacBook from the box, her impression was “Wow! It is so beautiful, sleek and … “, something words could not describe.

I spent some hours to guide her using a Mac and she caught on quite well. She was most impressed when I showed her how I could help her using her Mac via iChat. Totally amazed, how iChat could allow her to share her screen to me and I could guide her to use her Mac and some applications over the Internet.

Another happy Mac user.

My installation is on MacBook 2.16GHz Intel Core 2 Duo running Mac OS 10.4.10 with Xcode 2.4.1. Pre-requisition is to have Xcode installed before installing gnat-4.3.

1. Go to MacAda.org to download gnat-4.3 and other necessary tools. Launch the installation in the disk image.
2. Make the following softlinks:

   
   $ ln -s /usr/local/ada-4.3/bin/gcc /usr/bin/gcc-4.3
   $ ln -s /usr/local/ada-4.3/bin/g++ /usr/bin/g++-4.3
   

3. Launch gcc_select:

   
   $ sudo gcc_select 4.3